RESUMO Introdução: Em Ortodontia e Ortopedia Facial, o momento de início do tratamento pode ser crítico, e uma análise individual deve ser aplicada para promover um planejamento de tratamento favorável. No presente estudo, foram realizadas a avaliação individualizada da sutura palatina mediana (SPM) e medições no palato de adolescentes e adultos jovens tratados com expansão rápida da maxila (ERM). Descrição: Foram avaliados vinte e seis pacientes submetidos à ERM com aparelho dentossuportado (Hyrax). Os critérios de inclusão foram: idade mínima de 14 anos, apresentando todos os dentes posteriores, diagnosticado com discrepância transversa da maxila e com uma indicação clínica para expansão maxilar. A tomografia computadorizada de feixe cônico (TCFC) pré-tratamento desses pacientes foi avaliada para obter os estágios de maturação da SPM (MSPM), densidade da SPM (DSPM), comprimento do palato, espessura (anterior, intermediária e posterior) e área sagital. Resultados: Os estágios de maturação presentes foram C, D ou E; a densidade variou de 0,6 a 1, e foram determinados grupos de baixa (DSPM < 0,75) e alta densidade (DSPM ≥ 0,75). Indivíduos com maior DSPM apresentaram menor área sagital, em comparação com o grupo de densidade mais baixa. Indivíduos nos estágios D e E de MSPM apresentaram menor área sagital e espessura intermediária, comparados aos indivíduos no estágio C. Conclusão: Uma menor área sagital palatina foi observada nos grupos de alta DSPM e nos estágios D e E de MSPM.

ABSTRACT Introduction: In Orthodontics and Facial Orthopedics, the timing of treatment onset may be critical and individual analysis should be applied to promote a favorable treatment planning. In this study, individual analysis of midpalatal suture (MS) and palatal measurements were performed in teenagers and young adult patients treated with rapid maxillary expansion (RME). Description: Twenty-six patients submitted to RME with a tooth-supported appliance (Hyrax) were evaluated. The inclusion criteria were: minimum age of 14 years, presenting all posterior teeth, diagnosed with transverse maxillary discrepancy, and with a clinical indication for maxillary expansion. The pretreatment CBCT scans of these patients were assessed to obtain the stages of MS maturation (MSM); density ratio (MSD); and palatal length, thickness (anterior, intermediate and posterior) and sagittal area. Results: The maturation stages present were C, D or E; the density ranged from 0.6 to 1, and lower density (MSD < 0.75) and higher density (MSD ≥ 0.75) groups were determined. Individuals with higher MSD presented smaller sagittal area, compared to the lower density group. Individuals in D and E MSM stages presented smaller sagittal area and intermediate thickness, compared to stage C. Conclusions: Smaller palatal sagittal area was observed in the high MSD groups and in the stages D and E of MSM.

RESUMO Objetivo: Avaliar a cor de diferentes resinas ortodônticas expostas a três enxaguantes bucais, por um intervalo de tempo prolongado (simulação de 10 anos de envelhecimento). Métodos: 160 espécimes foram distribuídos em quatro grupos, de acordo com a resina de colagem ortodôntica (Concise, Transbond XT, Transbond Plus Color Change e Natural Ortho). Cada grupo foi exposto a diferentes tipos de enxaguantes bucais: à base de álcool (Listerine®), isento de álcool (Oral-B®), clorexidina (Periogard®) ou água destilada, como controle. Os espécimes foram submetidos a dois ciclos de manchamento e envelhecimento artificial. A cor foi avaliada por meio de um espectrofotômetro digital no início do experimento e após cada ciclo. O sistema utilizado para avaliar as alterações de cor foi o CIE L*a*b*. Os dados foram analisados utilizando-se o teste ANOVA e o teste post-hoc de Tukey. Resultados: Após a simulação de 10 anos de envelhecimento, as resinas Transbond XT e Natural Ortho não apresentaram diferenças estatisticamente significativas no ∆E, quando expostas a diferentes enxaguantes bucais. Os espécimes do grupo Concise expostos ao enxaguante bucal sem álcool apresentaram diferença significativa quando comparados aos espécimes do mesmo grupo expostos aos outros enxaguantes bucais. Os espécimes do grupo Transbond Plus Color Change expostos à clorexidina e ao enxaguante bucal à base de álcool apresentaram diferença significativa quando comparados aos espécimes dos grupos expostos à água e ao enxaguante bucal sem álcool. Conclusão: Todas as resinas ortodônticas avaliadas apresentaram alterações de cor clinicamente perceptíveis quando expostas a pelo menos um dos enxaguantes bucais, com exceção da resina ortodôntica Natural Ortho. A resina Concise exposta à solução isenta de álcool foi a que apresentou os maiores valores de alteração de cor.

ABSTRACT Objective: To assess the color of different orthodontic resin bonding agents exposed to three antiseptic mouthrinses for a prolonged time interval (10-year aging simulation). Methods: 160 specimens were distributed into four groups, according to the orthodontic resin bond agent (Concise, Transbond XT, Transbond Plus Color Change, and Natural Ortho). Each group was exposed to different antiseptic mouthrinses: alcohol-based (Listerine®), alcohol-free (Oral-B®), chlorhexidine (Periogard®) and distilled water as the control. Specimens were submitted to two cycles of staining and artificial aging. Color was evaluated by means of a digital spectrophotometer at the beginning of the experiment and after every cycle. The system used to assess color changes was the CIE L*a*b*. Data was analyzed using the ANOVA and Tukey post-hoc test. Results: After simulation of 10 years of aging, Transbond XT and Natural Ortho composites presented no statistically significant differences in ∆E when exposed to different mouthrinses. The Concise composite specimens exposed to alcohol-free mouthrinse presented a significant difference when compared with specimens from the same group exposed to other antiseptic mouthrinses. Transbond Plus Color Change specimens exposed to chlorhexidine mouthrinse and to alcohol-containing mouthrinse presented a significant difference when compared with the specimens from the group exposed to water and alcohol-free antiseptic. Conclusion: All orthodontic resin bonding agents tested presented clinically perceptible color changes when exposed to at least one of the mouthrinses, except for the Natural Ortho composite. The Concise composite exposed to the alcohol-free solution was the resin that presented the highest color change values.

RESUMO Objetivo: avaliar o volume e a morfologia da porção média da faringe (PMF) em adolescentes com diferentes padrões esqueléticos no sentido anteroposterior. Método: para esse estudo transversal, foram selecionados cento e vinte e seis pacientes (56 homens e 70 mulheres) que tinham tomografia computadorizada de feixe cônico (TCFC) em seus registros. Os participantes foram classificados de acordo com o valor do ângulo ANB, em Classe I (1o ≥ ANB ≤ 3o), Classe II (ANB > 3o) e Classe III (ANB < 1o). O volume total (Vt), a área axial mínima (AxMin) e a morfologia da PMF e de suas subdivisões - velofaringe (VF) e orofaringe (OF) - foram avaliados na TCFC e em software de reconstrução tridimensional (3D) de imagens. As comparações intergrupos foram realizadas por meio dos testes ANOVA e post-hoc de Tukey. As correlações entre os valores de Vt e Axmin das vias aéreas com os valores do ângulo ANB foram testadas por meio de análise de regressão linear, considerando-se o sexo como uma covariável. Resultados: diferença estatisticamente significativa entre os grupos foi observada apenas no Vt da VF; indivíduos Classe II apresentaram Vt significativamente menor (6.863,75 ± 2.627,20 mm3) do que indivíduos Classe III (9.011,62 ± 3.442,56 mm3) (p< 0,05). Não foram observadas diferenças significativas entre os grupos em nenhuma outra variável avaliada, nem na PMF, nem na OF (p> 0,05). Foi evidenciada uma correlação negativa significativa entre Vt e Axmin e os valores do ângulo ANB; dimorfismo sexual foi observado para algumas variáveis. Conclusões: indivíduos Classe II apresentam o menor Vt da VF. O Vt e a Axmin tenderam a diminuir quando os valores do ângulo ANB aumentaram, em todas as regiões avaliadas.

ABSTRACT Objective: To assess the volume and morphology of the middle region of the pharynx (MRP) in adolescents with different anteroposterior craniofacial skeletal patterns. Methods: One hundred twenty-six patients (56 male and 70 female), who had cone-beam computed tomography (CBCT) within their records, were selected for this cross-sectional study. Participants were classified, according to their ANB angle value, in Class I (1o ≤ ANB ≤ 3o), Class II (ANB > 3o) and Class III (ANB < 1o). The total volume (tV), minimum axial area (AxMin) and morphology of the MRP and its subdivisions - velopharynx (VP) and oropharynx (OP) - were characterized by CBCT and 3-dimensional image reconstruction software. Intergroup comparisons were performed by ANOVA and Tukey post-hoc tests. Correlations between tV and Axmin with the ANB angle values were tested using linear regression analysis, considering sex as covariable. Results: Statistically significant difference between groups were observed in tV only for the VP region; Class II individuals presented significantly lower tV (6863.75 ± 2627.20 mm3) than Class III subjects (9011.62 ± 3442.56 mm3) (p< 0.05). No significant differences were observed between groups for any other variable assessed, neither in MRP nor in the OP region (p> 0.05). A significant negative correlation was evidenced between tV and Axmin and the ANB angle values; sexual dimorphism was observed for some variables. Conclusions: Class II subjects have smaller tV in the VP region. tV and Axmin tend to decrease in all evaluated regions when the ANB angle values increase.

Abstract: Orthodontic bonding systems are submitted to demineralization and remineralization dynamics that might compromise their surface smoothness, and favor biofilm aggregation and caries development. The aim of the present study was to evaluate the effects of a cariogenic challenge model (in vitro pH-cycling model) on the surface roughness and topography of 3 bonding materials: Transbond™ XT (XT), Transbond™ Plus Color Change (PLUS) and Fuji Ortho™ LC (FUJI), by means of Atomic Force Microscopy (AFM). Six specimens with standardized dimensions and surface smoothness were fabricated per group, and the materials were manipulated in accordance with the manufacturers' instructions. No polishing was necessary. AFM tests were performed before and after pH-cycling, taking 3 readouts per specimen. The roughness results (Ra) were obtained at nanometric levels (nm) and surface records were acquired in two- and three-dimensional images of height and lock-in phase of the material components. The surfaces of all groups analyzed in the study were morphologically altered, presenting images suggestive of matrix degradation and loss of matrix-load integrity. FUJI presented the greatest increase in surface roughness, followed by XT and PLUS, respectively (p≤0.001). Nevertheless, the roughness values found did not present sufficient degradation to harbor bacteria. The surface roughness of all tested materials was increased by pH-cycling. The use of materials capable of resisting degradation in the oral environment is recommended, in order to conserve their integrity and of the surrounding tissues.

Abstract Botulinum toxin type A is effective in reducing excessive gingival display caused by hyperfunctional upper lip elevator muscles; however, this effect is transient. This study aimed to determine the duration of the effectiveness of botulinum toxin type A on a gummy smile. A systematic search was conducted using Medline (PubMed), Scopus, and Web of Science electronic databases, from 1970 to March 2017 with no language restriction; the search included studies evaluating adult patients with excessive gingival display who were treated with botulinum toxin and were followed-up for at least 3 months. OpenGrey and Clinical Trial Registry were also consulted. Quality assessment was applied to determine the level of evidence and bias, and a meta-analysis was performed. Of 2181 full texts, 71 were obtained, with 3 prospective studies meeting the selection criteria. The gingival display was significantly reduced to baseline with 2, 4, and 8 weeks of treatment. The gingival display considerably reduced at the baseline-2-week comparison (–4.44 mm using raw data and–4.05 mm using the standard difference) and increased throughout the weeks of follow-up. There is scant evidence to determine the duration of the effectiveness of toxin type A on a gummy smile. The effect tends to be stable until at least 8 weeks of follow-up, and the gingival exposure may not return to baseline within 12 weeks of follow-up. Well-designed randomized clinical trials with a minimum of 6 months of follow-up are necessary to strengthen the evidence.

RESUMO OBJETIVO: o objetivo da presente revisão sistemática foi avaliar a duração do período de contenção e a estabilidade do tratamento ortodôntico com expansão maxilar em pacientes em crescimento com mordida cruzada posterior. MÉTODOS: foram realizadas buscas estratégicas nas bases eletrônicas: Cochrane Library, Web of Science, PubMed e Scopus, até 15 de janeiro de 2016. Os critérios de inclusão foram: estudos clínicos controlados e randomizados, prospectivos ou retrospectivos, de pacientes em crescimento com mordida cruzada; tratados com aparelhos expansores maxilares, com fase de contenção pós-expansão e no mínimo seis meses de fase de pós-contenção. Os critérios de exclusão foram: mordida cruzada anterior, anomalias craniofaciais, cirurgia ou outro tratamento ortodôntico; relato de casos; artigos de opinião; teses; revisões de literatura e revisões sistemáticas. O risco de viés dos artigos selecionados foi avaliado a partir do Cochrane risk of bias tool para ensaios clínicos randomizados e Downs and Black checklist para ensaios clínicos não randomizados. RESULTADOS: a busca resultou em 156 títulos/resumos, sendo 44 textos examinados na íntegra. Foram selecionados 6 artigos para o acesso à qualidade metodológica. A duração do período de contenção ocorreu entre 4 semanas e 6 meses. Aparelhos fixos (aparelho em acrílico, Haas, Hyrax e quad-helix) ou removíveis (Hawley e Hawley com expansor) foram utilizados na fase de contenção. CONCLUSÃO: parece que seis meses de contenção com aparelhos fixos ou removíveis são suficientes para evitar a recidiva ou garantir mudanças mínimas em um curto período de acompanhamento pós-contenção.

ABSTRACT OBJECTIVE: The aim of this systematic review was to evaluate the duration of the retention period in growing patients undergoing maxillary expansion and its relation with posterior crossbite stability. METHODS: Search strategies were executed for electronic databases Cochrane Library, Web of Science, PubMed and Scopus, which were completed on January 15, 2016. The inclusion criteria included randomized, prospective or retrospective controlled trials in growing subjects with posterior crossbite; treated with maxillary expanders; retention phase after expansion; post-retention phase of at least 6 months. The exclusion criteria were anterior crossbite, craniofacial anomalies, surgery or another orthodontic intervention; case reports; author’s opinions articles, thesis, literature reviews and systematic reviews. The risk of bias of selected articles was assessed with Cochrane risk of bias tool for RCTs and Downs and Black checklist for non-RCTs. RESULTS: A total of 156 titles/abstracts was retrieved, 44 full-texts were examined, and 6 articles were selected and assessed for their methodological quality. The retention period after maxillary expansion ranged between 4 weeks and 16 months. Fixed (acrylic plate, Haas, Hyrax and quad-helix) or removable (Hawley and Hawley expander) appliances were used for retention. CONCLUSIONS: Six months of retention with either fixed or removable appliances seem to be enough to avoid relapse or to guarantee minimal changes in a short-term follow-up.

Abstract The objective of this study was to compare coating dimensions and surface characteristics of two different esthetic covered nickel-titanium orthodontic rectangular archwires, as-received from the manufacturer and after oral exposure. The study was designed for comparative purposes. Both archwires, as-received from the manufacturer, were observed using a stereomicroscope to measure coating thickness and inner metallic dimensions. The wires were also exposed to oral environment in 11 orthodontic active patients for 21 days. After removing the samples, stereomicroscopy images were captured, coating loss was measured and its percentage was calculated. Three segments of each wire (one as-received and two after oral exposure) were observed using scanning electron microscopy for a qualitative analysis of the labial surface of the wires. The Lilliefors test and independent t-test were applied to verify normality of data and statistical differences between wires, respectively. The significance level adopted was 0.05. The results showed that the differences between the wires while comparing inner height and thickness were statistically significant (p < 0.0001). In average, the most recently launched wire presented a coating thickness twice that of the control wire, which was also a statistically significant difference. The coating loss percentage was also statistically different (p = 0.0346) when the latest launched wire (13.27%) was compared to the control (29.63%). In conclusion, the coating of the most recent wire was thicker and more uniform, whereas the control had a thinner coating on the edges. After oral exposure, both tested wires presented coating loss, but the most recently launched wire exhibited better results.

OBJETIVO: o objetivo do presente estudo foi avaliar a influência da sobreposição estrutural e da magnificação nas radiografias cefalométricas laterais (RCL) geradas por meio de tomografias computadorizadas de feixe cônico (TCFC), usando diferentes segmentos do crânio. MÉTODOS: foram selecionadas 10 tomografias de pacientes. Quatro RCL foram geradas usando Dolphin Imaging, sendo face total, lado direito, lado esquerdo e o centro da cabeça. Um total de 40 imagens foi importado para o Radiocef Studio, e os ângulos das análises cefalométricas mais comuns foram medidos pelo mesmo observador, duas vezes, em um intervalo de 10 dias. As análises estatísticas incluíram concordância intraexaminador e comparação entre os métodos por meio do coeficiente de correlação intraclasse (ICC) e testes de concordância de Bland-Altman. RESULTADOS: a concordância intraexaminador dos ângulos avaliados pelo ICC foi excelente (> 0,90) para 83% das medições, boa (entre 0,75 e 0,90) para 15%, e moderada (entre 0,50 e 0,75) para 2% das medições. A comparação entre os métodos por ICC foi excelente para 68% das medições, boa para 26% e moderada para 6%. As variáveis que apresentaram intervalos de confiança mais amplos (> 6°) nos testes de Bland-Altman, na avaliação intraexaminador, foram: incisivo superior, incisivo inferior e plano oclusal, enquanto nos métodos de comparação, as variáveis com intervalos de confiança mais amplos foram: incisivo inferior, incisivo superior, GoGn, ângulo do plano oclusal, plano horizontal de Frankfort e CoA. CONCLUSÃO: a sobreposição estrutural pareceu influenciar os resultados mais do que a magnificação, mas os métodos não influenciaram significativamente as medições. Considerável variabilidade individual pode ocorrer especialmente para os incisivos superiores e inferiores, plano horizontal de Frankfort e plano oclusal.

OBJECTIVE: The purpose of this study was to assess the influence of magnification and superimposition of structures on CBCT-generated lateral cephalometric radiographs (LCR) using different segments of the cranium. METHODS: CBCT scans of 10 patients were selected. Four LCR were generated using Dolphin Imaging(r) software: full-face, right side, left side and center of the head. A total of 40 images were imported into Radiocef Studio 2(r), and the angles of the most common cephalometric analyses were traced by the same observer twice and within a 10-day interval. Statistical analyses included intraexaminer agreement and comparison between methods by means of intraclass correlation coefficient (ICC) and Bland-Altman agreement tests. RESULTS: Intraexaminer agreement of the angles assessed by ICC was excellent (> 0.90) for 83% of measurements, good (between 0.75 and 0.90) for 15%, and moderate (between 0.50 and 0.75) for 2% of measurements. The comparison between methods by ICC was excellent for 68% of measurements, good for 26%, and moderate for 6%. Variables presenting wider confidence intervals (> 6o) in the Bland-Altman tests, in intraexaminer assessment, were: mandibular incisor angle, maxillary incisor angle, and occlusal plane angle. And in comparison methods the variables with wider confidence interval were: mandibular incisor, maxillary incisor, GoGn, occlusal plane angle, Frankfort horizontal plane (FHP), and CoA. CONCLUSION: Superimposition of structures seemed to influence the results more than magnification, and neither one of them significantly influenced the measurements. Considerable individual variability may occur, especially for mandibular and maxillary incisors, FHP and occlusal plane.

OBJETIVO: determinar, por meio de uma revisão sistemática, o melhor tratamento entre desgastes interproximais e extração de incisivos para a correção de apinhamento anteroinferior em pacientes Classe I com dentição permanente. MÉTODOS: foram feitas buscas nas bases de dados eletrônicas MEDLINE, Scopus e Web of Science por artigos publicados de janeiro de 1950 até outubro de 2013. Os critérios de inclusão foram estudos que abordassem tratamentos com desgastes interproximais e/ou extração de incisivos inferiores, de casos Classe I com apinhamento anteroinferior na dentição permanente. RESULTADOS: dos 943 artigos encontrados após a remoção dos duplicados, 925 foram excluídos após a leitura dos resumos. Após leitura dos artigos completos, 13 foram excluídos pelos critérios de eligibilidade e um pela qualidade metodológica, restando quatro artigos, sendo dois retrospectivos e dois prospectivos randomizados. Os dados foram coletados, analisados e organizados em tabelas. CONCLUSÕES: tanto o desgaste interproximal quanto a extração de incisivo inferior são tratamentos eficazes em Classe I na dentição permanente, com apinhamento anteroinferior moderado e perfil facial agradável. Há fracas evidências para determinar a escolha do melhor tratamento para cada caso. A decisão clínica deve ser tomada em bases individuais, considerando as características anatômicas dentárias, da severidade do apinhamento, condições de saúde dentária e bucal, expectativas dos pacientes e ensaio em modelos (set-up).

OBJECTIVE: To determine by means of a systematic review the best treatment, whether interproximal wear or incisor extraction, to correct anterior lower crowding in Class I patients in permanent dentition. METHODS: A literature review was conducted using MEDLINE, Scopus and Web of Science to retrieve studies published between January 1950 and October 2013. In selecting the sample, the following inclusion criteria were applied: studies involving interproximal wear and/or extraction of mandibular incisors, as well as Class I cases with anterior lower crowding in permanent dentition. RESULTS: Out of a total of 943 articles found after excluding duplicates, 925 were excluded after abstract analysis. After full articles were read, 13 were excluded by the eligibility criteria and one due to methodological quality; therefore, only fours articles remained: two retrospective and two randomized prospective studies. Data were collected, analyzed and organized in tables. CONCLUSION: Both interproximal wear and mandibular incisor extraction are effective in treating Class I malocclusion in permanent dentition with moderate anterior lower crowding and pleasant facial profile. There is scant evidence to determine the best treatment option for each case. Clinical decision should be made on an individual basis by taking into account dental characteristics, crowding, dental and oral health, patient's expectations and the use of set-up models.

OBJETIVO: avaliar, por meio de tomografias computadorizada de feixe cônico (TCFC), as dimensões transversais do complexo nasomaxilar de pacientes submetidos à expansão rápida da maxila (ERM) e sem intervenção. MÉTODOS: este estudo clínico prospectivo e controlado avaliou 30 indivíduos (18 meninos e 12 meninas) durante o período de crescimento puberal e dentição mista. O grupo tratado foi submetido à ERM com expansor de Haas, permanecendo 6 meses em contenção e sendo acompanhados por mais 6 meses após a remoção. O grupo controle foi acompanhado durante o mesmo tempo. Foram realizadas TCFC ao início e um ano após a fase ativa. Com o programa Dolphin Imaging 11.5, a largura entre os primeiros molares superiores (U6), angulação dos U6 direito e esquerdo, largura maxilar alveolar, largura maxilar basal, largura alveolar do palato, largura basal do palato, angulação alveolar direita e esquerda, área palatina, largura da base nasal, largura da cavidade nasal e área da cavidade nasal inferior foram obtidas em cortes coronais posterior, médio e anterior, com exceção das duas primeiras medidas, que foram obtidas apenas no corte coronal posterior. RESULTADOS: todas as medidas foram significativamente (p < 0,05) maiores no grupo da ERM, com exceção da angulação alveolar e da área da cavidade nasal, as quais não foram significativas (p > 0,05) entre os grupos. Os resultados sugerem que, um ano após a ERM, a dimensão transversal na cavidade nasal, maxila, palato e região dos molares são maiores do que em indivíduos não tratados. O protocolo de ERM utilizado foi eficaz na manutenção da dimensão transversal durante período de acompanhamento.

The aim of this study was to assess by means of cone-beam computed tomography (CBCT) scans the transverse effects on the nasomaxillary complex in patients submitted to rapid maxillary expansion (RME) using Haas expander in comparison to untreated individuals. This prospective controlled clinical study assessed 30 subjects (18 boys and 12 girls) with mixed dentition and during pubertal growth. The treated group was submitted to RME with Haas expander, retention for six months and a six-month follow-up after removal. The control group matched the treated group in terms of age and sex distribution. CBCT scans were taken at treatment onset and one year after the expander was activated. Maxillary first molars (U6) width, right and left U6 angulation, maxillary alveolar width, maxillary basal width, palatal alveolar width, palatal base width, right and left alveolar angulation, palatal area, nasal base width, nasal cavity width and inferior nasal cavity area on the posterior, middle and anterior coronal slices were measured with Dolphin Imaging Software(r) 11.5, except for the first two variables which were performed only on the posterior slice. All transverse dimensions increased significantly (P < 0.05) in the treated group in comparison to the control, except for alveolar angulation and inferior nasal cavity area (P > 0.05). Results suggest that increase of molar, maxillary, palatal and nasal transverse dimensions was stable in comparison to the control group one year after treatment with RME.

Objetivo: validar um método para avaliar assimetria dentária, em relação à linha média esquelética, usando TCFC. Métodos: dez pacientes que realizaram TCFC foram selecionados aleatoriamente para esse estudo. Cinco diferentes observadores repetiram 10 pontos de referência (com variáveis x, y e z, para cada ponto) e 12 medidas lineares em um intervalo de 10 dias. As medições foram realizadas em ambas as arcadas, para avaliar a simetria de primeiros molares, caninos e linha média dentária, em relação à linha média esquelética. Índice de correlação intraclasse (ICC) foi realizado para verificar a confiabilidade intraobservador e interobservadores para os pontos de referência e distâncias. A diferença média também foi avaliada, para checar os erros de mensuração entre os observadores. Resultados: ICC para os pontos de referência foram ≥ 0,9 para 27 (90%) e 25 (83%) das variáveis para intra- e interobservadores respectivamente. ICC para distâncias foi ≥ 0,9 para 7 (58%) e 5 (42%), respectivamente. Todas as medidas de ICC para distâncias foram > 0,75 para intraobservador e interobservadores. A diferença média entre observadores foi ≤ 0,6mm para todas as distâncias. Conclusão: o método de verificação de assimetria dentária utilizando TCFC é válido. Medições de molares, caninos e linha média dentária com a linha média esquelética são reproduzíveis e confiáveis quando feitas utilizando TCFC, mesmo que por diferentes operadores.

Objective: The aim of this study was to validate a method used to assess dental asymmetry, in relation to the skeletal midline, by means of CBCT. Methods: Ten patients who had CBCT scans taken were randomly selected for this study. Five different observers repeated 10 landmarks (x, y and z variables for each) and 12 linear measurements within 10 days. Measurements were taken in both arches to evaluate symmetry of first molars, canines and dental midline in relation to the skeletal midline. Intraclass correlation coefficient (ICC) was carried out to assess intra- and interobserver reliability for landmarks and distances. Average mean difference was also assessed to check measurement errors between observers. Results: ICC landmarks was ≥ 0.9 for 27 (90%) and 25 (83%) variables for intra- and interobserver, respectively. ICC for distances was ≥ 0.9 for 7 (58%) and 5 (42%), respectively. All ICC landmarks for distances were >0.75 for both intra- and interobserver. The mean difference between observers was ≤ 0.6 mm for all the distances. Conclusion: The method used to assess dental asymmetry by means of CBCT is valid. Measurements of molars, canines and dental midline symmetry with the skeletal midline are reproducible and reliable when taken by means of CBCT and by different operators.

OBJECTIVE: To evaluate cephalometric changes in tooth and profile position in young adolescent individuals with Class I biprotrusion submitted to orthodontic treatment with extractions of four first premolars. METHODS: Pre and posttreatment lateral cephalometric radiographs from 20 patients with Class I biprotrusion malocclusion were used to evaluate the following measurements: nasolabial angle, distance from lips to E line, distance from lips, incisors, tip of the nose and soft tissue pogonion to Sy line. RESULTS: All measurements showed significant changes after treatment (p<0.05), except the distance from lips and soft tissue pogonion to Sy line. There was a positive correlation between the retraction of incisors and the change of upper and lower lips (0.803/0.925; p<0.001). CONCLUSION: The profile retrusion observed occurred more due to nose growth than to lips retraction. The response from soft tissues to incisors retraction showed a great variability.